Nyle L200M Kiln

Our materials focus is high quality at low prices. Our hardwood materials are kiln dried and undergo an end of cycle high heat sterilization process. We do however utilize appointments to better serve each of our customers. We understand many like to come and go as they please, but our model and the reasoning behind it is pretty simple. I want to save you time. I want to save you money so you can make more projects and earn/save more per project. I also want to provide you the best & most honest advice I can.

Hence, we do appointments to largely eliminate unnecessary waiting, to provide a one on one service encounter with a subject matter expert, and to resultantly offer lower prices accomplished through reduced overhead. You probably won’t walk away and say, “They sure do have a great sign.” Although, we do hope you walk away having had a pretty good time. Plus, had all your questions answered directly and respectfully.

Presently, we have project ready material available in some form or fashion in the following wood species: Black Walnut, Maple/Ambrosia Maple, White Oak, Ash, Cherry, Poplar/Spalted Poplar, Pecan, Hickory, Eastern Red Cedar, Cypress & Beetle Kill/Blue Pine. Occasionally, we have other domestic wood species offerings.

The below pictures do not represent our complete inventory. We update the website as often as possible, but not in real time.

Kiln Dried Black Walnut Boards/Lumber - 8+ footers

Milled as 5/4”T x 8” W x 8+ft lengths.

$40/each

Just came out of the kiln and we have several dozen on hand.

Kiln Dried Black Walnut Boards/Lumber - 10+ footers

Milled as 5/4”T x 8” W x 10+ft lengths.

$60/each

Just came out of the kiln and we have a few dozen on hand.

Kiln Dried Beetle Kill Pine/Blue Pine Crafter Special

These boards were milled at 1” x 8” x 8ft lengths.

They have additionally been surface planed on 2 sides to uniform thickness between 3/4” and 7/8” thick.

$20/each

Kiln Dried White Oak Live Edge Slab that has already been flattened and then surface planed on 2 sides.

Flattened at 1.75”Thick x 18-23”Wide x 69”Long

$175

Kiln Dried Black Walnut Boards/Lumber - approximately 13 footers +/-

Milled as 5/4”T x 8” W x about 13ft lengths.

$65/each That is $6/bf out the door on fully Kiln Dried and high heat sterilized beautiful Black Walnut.

We have only about 4 dozen on hand. Don’t tarry!

Kiln Dried Black Walnut Live Edge Slabs

Left - SOLD

Right - 2.25”T x 14-16”W x 103”L - $190

Kiln Dried Poplar Boards/Lumber - approximately 12.5 footers +/-

Milled as 5/4”T x 8” W x approximately 12.5ft lengths.

Just $40/each That’s less than $4/bf out the door on fully Kiln Dried and high heat sterilized Poplar boards that are separately well over 12ft long.

Kiln Dried Maple Live Edge Slab that has already been flattened and then surface planed on 2 sides (S2S).

Flattened at 1.75”T x 15-16”W x 50”L

$85

Kiln Dried Maple Live Edge Slab that has already been flattened and surfaced on 2 sides (S2S).

Flattened at 1.75”T x 15-21” x 30”L / Great piece for a large end table, occasional table, or smaller coffee table. Much of the bigger machinery work has already been done with this already flattened/surfaced on 2 sides

$65

Kiln Dried Ambrosia Maple Live Edge Slab Shorts

$60 and $50 as marked. Terrific end table or large serving board slabs. With a little skill and effort, they could also easily become 4 gorgeous 2+ft floating shelves.

Kiln Dried Poplar Boards/Lumber - shorts at 42-54” lengths Some are Spalted and Rainbow Poplar

Milled as 5/4”T x 8” W x 42-54” lengths.

$12/each

Just came out of the kiln. We have maybe a dozen or two left.

Kiln Dried Poplar Boards/Lumber - shorts at approximately 3ft lengths Some are Spalted and Rainbow Poplar

Milled as 5/4”T x 8” W x around 3’ lengths.

$8/each while they last.

Just came out of the kiln. We have maybe a dozen left.

Kiln Dried Red Oak Live Edge Slab - this water or pin oak slab is a BARgain

Discounted for a center cup, but this could easily be 4 really fly live edge shelves with a center rip, couple cross cuts, and some individual slab surfacing for less material loss.

2”T x 20-23”W x 84”L - $100 cash.

Do the math! That’s over 25bf of kiln dried thick live edge slab material for $100 cash.

Kiln Dried Black Walnut Live Edge Slabs

Left - 2.25”T x 17-19”W x 46”L - $105

Right - sold

Kiln Dried Black Walnut Live Edge Slabs

Super fab shorts

Left - sold

Middle - 2.25”T x 10-20”W x 48”L - $85 (another great small table prospect)

Right - sold

Kiln Dried Black Walnut Live Edge Slabs

Left - 2.25”T x 16-17”W x 51”L - $105

Right - 2.25”T x 16-18”W x 48” L - $105

Kiln Dried Black Walnut Live Edge Slabs

Left - sold

Right - 2.25”T x 13-14”W x 42” L - $65

Kiln Dried Black Walnut Live Edge Slabs

Left - 2.25”T x 18-21”W x 50”L - discounted at $110

Right - 2”T x 14-20”W x 50” L - discounted at $90

Kiln Dried Black Walnut Live Edge Slabs

Left - 2.25”T x 20-23”W x 51”L - $140

Right - sold

Kiln Dried Black Walnut Live Edge Slabs

Left - 2.25”T x 15-23”W x 48”L - discounted at $95

Right - 2.25”T x 18-20”W x 46” L - discounted at $95

Kiln Dried Black Walnut Live Edge Slabs

Left - 2.25”T x 17-20”W x 49”L - $120

Right -sold

Kiln Dried Black Walnut Live Edge Slabs

Left - 2”T x 10-16”W x 46”L - $60

Middle - 2”T x 11-14”W x 61”L - $80

Right - sold

Kiln Dried and Surfaced 3 Sides Live Edge Ambrosia Maple Shelf Blanks

Prices & Dimensions on the individual pieces as marked.

Kiln Dried Cherry S4S thicker pieces

Left $15 (available)

Right side $20 (already picked off by the first customer through the shop)

In reality, we often don’t even get the pics up of new items before they’re gone. Seriously!

Kiln Dried and Surfaced 3 Sides Live Edge Black Walnut Shelf Blanks

These have already been flattened and surfaced planed front and back, flush ripped on one side (live edge on the other) and squared to lengths. Ready for you to simply sand and finish.

Left - 2” T x 8” W x 28.5” L - $40

Right - 2 1/8” T x 11” W x 17.5” L - $28

Kiln Dried Black Walnut Live Edge Slabs

Just a few smalls.

5/4”T material

Kiln Dried Quartersawn White Oak Boards / Lumber Boards

These White Oak Boards were quartersawn milled at 5/4” Thick x 5-8” widths range & 6ft long.

Prices on them range from $20-40/each as marked

Kiln Dried Black Walnut Lumber/Boards

Milled at 5/4” x 6” x 104”

Discounted at $30/each

Kiln Dried Black Walnut Lumber/Boards

Milled at 5/4” x 6” x 96”

Discounted at $25-27/each

Kiln Dried Maple and Ambrosia Maple Live Edge Slab

Far Left - 2.5” Thick x 12-17” W (mostly at the wider with a fast taper) x 129” Long - $235

Others - all gone

Kiln Dried Hickory Lumber/Boards

Milled at 5/4” x 8” x 65”

These are just $18/each. I think I’ve paid more for a wheelbarrow full of dirt.

We have about 100 sticks in this size available.

These don’t look like much, but the picture immediately below shows what a few of these hickory boards looked like after some passes through the planer.

Kiln Dried Hickory Lumber/Boards

Here’s a few examples of the above $18 Hickory boards after a few passed through our planer.

And the most improved player award goes to…

FYI - If running hickory through your planer scares you, then we do offer surface planing and other milling/woodworking services for those interested.

Kiln Dried White Oak Lumber/Boards

These are approximately 1.75” T x 7.5” W x 48” L

$30/each

If you’ve shopped around the area, then you know it’s hard to beat that price per board foot - even with a stick.

Just a handful of these now left.

Kiln Dried Black Walnut Live Edge Slab Short

Neat little piece that would make a great end table, larger charcuterie/serving board, or more.

2.25” T x 18-20” x 23”

$40

Kiln Dried Maple Live Edge Slabs/Smalls

Left - $40

Right - $20

Kiln Dried Sycamore Live Edge Slabs

These are discounted for a twist not uncommon with drying Sycamore.

Gorgeous sleeper species and great price if cutting them down to make 5-6 ft or less project pieces where they are easier to flatten without losing too much thickness.

These are both 2” Thick, reasonably wide, and well over 10 ½ ft long.

That’s a lot of material for just $135 and $170 respectively.

Kiln Dried Sycamore Live Edge Slab Shorts

Great project slabs on the cheap!

Just $25 and $30/each on these sizable pieces as marked.

Kiln Dried Sycamore Live Edge Slab Shorts

Great project slabs on the cheap!

Discounted at just $25 and $30/each on these sizable smaller project pieces.

Kiln Dried Spalted Poplar Lumber/Boards

5/4” x 6.5-7.5” range x 123” (over 10ft) Long

$30-35/each on these beauties

Not your Auntie’s poplar.

Kiln Dried White Oak Live Edge Slab

Single side Live Edge Slab

2.25” T x 22-23” W x 70” L

$170

Discounted for checking / surface defects.

Kiln Dried White Oak Boards/Lumber

These are thinner and 5/4” Thick

Left - 5/4” T x 12-13” W x 73” L - $50

Right - 5/4” T x 10-11” W x 73” L — $40

Kiln Dried Cherry Live Edge Mantel Blank

4.25” T X 9-10” D X 78” Long

$175

Kiln Dried and Surface Planed on 2 Sides White Oak Mantel Blanks

These both have a pronounced and gorgeous live edge. Pics are either side L or R side orientation. These are already surface planed on 2 sides and flushed square on the back. Ready to sand and finish. We can give them the full turnkey treatment with floating bracket as well. Price displayed is back of your truck/car DIY price.

L side - sold

R side - 3.5” x 7-12” x 74” - $150.

Kiln Dried White Oak Chunky Live Edge Shelf Blank - S3S (Surface Planed 2 Sides + flush ripped single edge) & also squared to length.

2.75” T x 11.25” D x 36.5” L

$70

Kiln Dried Live Edge Wormy Ash Slabs

These are kiln dried and high heat sterilized. Bugs gone, character remains.

These are both discounted for checking as indicated.

Left - 2.25”T x 18-26”W x 101” L - $165 (discounted)

Right - 2.25”T x 19-26”W x 101” L - $170 (discounted)

Kiln Dried Live Edge Wormy Ash Slab Surface Planed on 2 Sides

Kiln dried and high heat sterilized. Bugs gone, character remains.

1.75” T 8 16-17”W x 72”Long - Surface planed front and back - $110

The Live Edge on this slab is amazing!

Touch of stain upper L hand corner was where we applied a dab of stain to show a customer what it might look like in that shade. Easy enough to sand off.

Kiln Dried Sycamore Live Edge Slab

The orange-colored one in the middle there that is marked $145

2” Thick x 15-21” Wide x 122” Long

Now that’s a lot of kiln dried goodness for just $145.

Kiln Dried Live Edge White Oak Slabs

These are among some of the largest slabs we have ever offered at Slabshuckers. There is a whole lotta process involved to reach this point. After nearly 1.5 years of air drying plus an additional 2.5 months of kiln drying these beasts are fully kiln dried, high heat sterilized and available.

3.25” Thick x 39-49” W x 109” Long

Single slab dining room table piece.

$1,000 (sale price)

Kiln Dried Eastern Red Cedar Live Edge Mantel Blanks

Left - 5.5” x 8-10” x 78” - Just $110 on this very unusual and rustic live edge blank. With a little creativity, wire brush, and/or epoxy. Well, pretty limitless.

Middle - 4.25” x 9-10” x 74” - $120

Right - sold

We have many other project ready Eastern Red Cedar live edge mantel blanks available.

Kiln Dried Eastern Red Cedar Live Edge Mantel Blanks

Left - 4.125” x 12” x 96” - $200

Right - 5'“ x 9-10” x 97” - $200

Kiln Dried Eastern Red Cedar Rectangular Mantel Blanks

Left - 4.5” x 10” x 96” - $180

Right - 4.5” x 9” x 75” - $120

We have many other project ready Eastern Red Cedar rectangular mantel blanks available.

Kiln Dried Cherry Mantel Blank

4.5” T X 9” D X 79” Long

$135 (discounted)

Kiln Dried Cherry Mantel Blank

4.5” T X 9.5” D X 78” Long

$185

Kiln Dried Cherry Rectangular Mantel Blank

3.5” T X 9.5” W X 80” Long

Just $110…

Kiln Dried Hickory Mantel Blanks

Left - 4.5” Thick X 11” Deep X 50” Long

Right - 4.5” Thick X 11” Deep X 45” Long

Just $100/each on either of these

Kiln Dried Ash Live Edge Slabs

Left - 2” T X 11-13” W X 74” L - $70

L Middle - 2” T X 12-17” W X 74” L - $80

R Middle - sold

Right - sold

Kiln Dried Ash Live Edge Slabs

Left - sold

Middle -sold

Right - 2” T X 12-17” W X 99” Long - $120 (Discounted to $100)

Kiln Dried Ash Live Edge Slabs

Left - 5/4” T x 9-14” W x 108” Long - $55

Right - (sold)

Kiln Dried Cypress Mantel Blanks

Milled at 8” x 8” these are dried and over 7.5” x 7.5” rough sawn blanks at 53” length.

Left two are available at $100/each.

Far right - sold

In case you haven’t noticed, we’re BEAMING over here…

8X8X10 Eastern Red Cedar for $250 / each. $220/each if buying 4 and paying cash ((We presently have a handful of them in stock))

If you’re looking for some statement porch posts, beams, or even a one of a kind custom mantel, then we can help with that also. These posts milled at 8” x 8” x 10ft are available for $250 / each. Several local retail competitors sell Canadian or Western Cedar nominal 8X8X10s (actual 7.25 x 7.25 x 120) at well over $500 /each. We additionally offer basic math skills to figure out the better deal. These are not treated pine, which is cheaper. If you’re looking for treated pine prices, then our best non-snarky advice is to buy treated pine. No, we don’t carry treated lumber. If you want 6x6 posts, then we carry those too.

We are the hostess with the postesses - yeah, something like that…

6x6X10 Eastern Red Cedar for JUST $100 / each. ((Just a handful in stock))

If you’re looking for some gorgeous wood, then Eastern Red Cedar doesn’t disappoint.

These make gorgeous porch posts and other.

We also offer dimensional cedar in 1x6s and 2x6s.

Eastern Red Cedar Boards/Lumber

These are cut at actual size, so healthier than most retail setting lumber, where a 2x4x8 is really 1.5x3.5x8 by example. These are also not kiln dried at this price point. Suitable for most outdoor project needs.

2×6×10s $30/each (just a few on hand) / 4×4×10 - $40 (couple hand) / 4×6×10 - $70 (only have one on hand) / 1×6, 1×8 & 1×10s (just a few of each)

Don’t see the size you need? Reach out and we can advise if that may be a potential option along with pricing and a timeline.

Mantel Cuts

We routinely have 50-100 or more mantel cuts in process and inventory. We commonly carry mantel cuts in up to half a dozen different domestic species. DIY mantle cuts typically begin around $100 and up depending on both size and wood species. We also offer custom woodworking services if you want a turnkey floating or other type mantel built.

Our options include, but are not limited to live edge, dimensional or beam, carved or hewn, epoxy void fills, and much more. We can also provide finished mantels with hanging hardware including invisible floating bracket, undermount visible brackets, carved same species undermount corbels, and more.